WARN 9.5ti Multi-Mount Portable Winch

~~^$1411.99~~

This item has an additional $19.99 shipping surcharge.
Acme Jeep Parts Part No: 92107.13

The 9.5ti Multi-Mount packs 9500lbs of portable pulling capacity into a massive 12.5lb aluminum die-cast body. The new shape not only looks great, but sheds the elements like no other winch on the market: seals at the key points give extreme-duty water resistance. A Gen II Bosch motor delivers just the right balance between torque and speed. Plus another Warn Industries first - operator feedback - the thermometric indicator gives the operator information about motor temperature during the winching operation. more...

Limited Lifetime Warranty.

Installation Notes

Install Time: 1-2 Hours
Installation Instructions: Download PDF

Need tools? Click here

Fits these Vehicles

Universal Fit - This part will fit most vehicles. Some universal fit products require that you select a specific size or style, based on the actual features on your Jeep or Truck.

Parts Included

125', 5/16" diameter (30m, 8mm diam.) Wire Rope
Hawse Fairlead
Gen II, Series Wound™ Motor
Remote switch, 12' (3.7m) lead
Spring- loaded control switches
Automatic Direct Drive Cone Brake
3-Stage Planetary with a 156:1 ratio
Sliding Ring Gear Clutch for freespooling
Front heavy-duty 7.5'/2.2m Battery Leads with Quick Connect Plug
Winch Carrier

Product Details

The 9.5ti Multi-Mount includes winch, ti remote, carrier, 7.5' power lead with quick connect plug for front of vehicle and hawse fairlead. Front receiver and rear power lead sold separately.

9.5ti MULTI-MOUNT SPECS/PART NUMBERS

Part Number: PN 65735, PN 67912 for the H2 Hummer

Rated Line Pull: 9500 lbs. (4310 kgs) single-line

Motor: Gen II, Series Wound^TM

Remote Control for PN 65735: Remote switch, 12' (3.7m) lead

Remote Control for PN 67912: Remote switch, 12' (3.7m) lead, thermometric indicator, S2 elements, integrated flashlight

Geartrain: 3-Stage Planetary

Gear Ratio: 156:1

Lubrication: Aeroshell #17

Clutch (freespooling): Sliding Ring Gear

Brake: Automatic Direct Drive Cone

Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)

Weight: 112 lbs. (51 kgs.)

Wire Rope: 125', 5/16" diameter (30m, 8mm diam.)

Fairlead: Hawse

Recommended Battery: 650 CCA minimum for winching

Battery Leads: Front heavy-duty 7.5'/2.2m with quick connect plug

Finish: Chromate with High-gloss Powder Coat

12V DC PERFORMANCE SPECS
Line Pull Lbs.(Kgs.)	Line Speed FT./min(M/min.)	Motor Current	Pull by layer layer/Lbs(Kgs.)
0	62(18.9)	47 amps	1/9500(4313)
2000(910)	16.3(4.97)	160 amps	2/8650(3927)
4000(1810)	11.8(3.60)	230 amps	3/7920(3595)
6000(2720)	9.31(2.84)	305 amps	4/7400(3359)
8000(3630)	7.59(2.31)	370 amps	5/6940(3150)
9500(4310)	6.67(2.03)	425 amps

Above performance specs are based on first layer of drum

1960-2008, Acme Truck Parts. All rights reserved.

This entire site with its content is copyright protected. You can not use any part of this web site without prior written consent from Acme Truck Parts.

Jeep parts, Warn winches, Ramsey winches, Mile Marker winches, Superwinch winches at discount prices

Jeep, Wrangler, Renegade, CJ, Cherokee, Grand Cherokee, Quadra-Trac, the Jeep Grille Design are registered trademarks of the Chrysler LLC. Throughout this web site all the preceding marks & logos are used for identification purposes only. Acme Jeep Parts Inc has no affiliation with the Chrysler LLC. It is not implied that any part listed is a product of, or approved by Chrysler LLC. All other marks, names, and logos mentioned on this web site are the property of their respective owners.

Visit our Jeep Parts and Jeep Accessories store at Quadratec.com
Visit our Truck Parts store at SuperTruckUSA.com